From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
The 8250_fintek driver advertises as the PNP0501 driver; however this
conflicts with the standard 16550A uart PNP0501. The conflict causes
the 8250_fintek driver to load with _every_ PNP0501, but never probe,
and causing the entire 8250 driver stack to unload if the 8250_fintek
driver is unloaded (modprobe doesn't know that 8250_pnp rather than
8250_fintek claimed the resource).
This patch merges the Fintek driver into 8250_base. On autoconfig_16550
the device is probed to verify if it is a FINTEK device or not.
This custom probing can be disabled completely via configuration. When a
Fintek device is not probed it will behave as a standard 16550A device,
with no RS485 capabilities.
Reported-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
Reviewed-by: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
References: boo#1016979
Git-commit: fa01e2ca9f531b4a5693469a196eb1574b8d7d8a
Patch-mainline: v4.7
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@xxxxxxxxx>
---
drivers/tty/serial/8250/8250.h | 6 ++
drivers/tty/serial/8250/8250_fintek.c | 118 +++++-----------------------------
drivers/tty/serial/8250/8250_port.c | 7 ++
drivers/tty/serial/8250/Kconfig | 20 +++---
drivers/tty/serial/8250/Makefile | 2 +-
5 files changed, 42 insertions(+), 111 deletions(-)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index ce587c0..1966619 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -139,6 +139,12 @@ static inline int serial8250_pnp_init(void) { return 0; }
static inline void serial8250_pnp_exit(void) { }
#endif
+#ifdef CONFIG_SERIAL_8250_FINTEK
+int fintek_8250_probe(struct uart_8250_port *uart);
+#else
+static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; }
+#endif
+
#ifdef CONFIG_ARCH_OMAP1
static inline int is_omap1_8250(struct uart_8250_port *pt)
{
diff --git a/drivers/tty/serial/8250/8250_fintek.c
b/drivers/tty/serial/8250/8250_fintek.c
index 8947439..870981d 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -1,9 +1,7 @@
/*
* Probe for F81216A LPC to 4 UART
*
- * Based on drivers/tty/serial/8250_pnp.c, by Russell King, et al
- *
- * Copyright (C) 2014 Ricardo Ribalda, Qtechnology A/S
+ * Copyright (C) 2014-2016 Ricardo Ribalda, Qtechnology A/S
*
*
* This program is free software; you can redistribute it and/or modify
@@ -38,19 +36,15 @@
#define RXW4C_IRA BIT(3)
#define TXW4C_IRA BIT(2)
-#define DRIVER_NAME '8250_fintek'
-
struct fintek_8250 {
u16 base_port;
u8 index;
u8 key;
- long line;
};
static int fintek_8250_enter_key(u16 base_port, u8 key)
{
-
- if (!request_muxed_region(base_port, 2, DRIVER_NAME))
+ if (!request_muxed_region(base_port, 2, '8250_fintek'))
return -EBUSY;
outb(key, base_port + ADDR_PORT);
@@ -138,7 +132,7 @@ static int fintek_8250_rs485_config(struct uart_port *port,
return 0;
}
-static int fintek_8250_base_port(u16 io_address, u8 *key, u8 *index)
+static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
{
static const u16 addr[] = {0x4e, 0x2e};
static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
@@ -168,10 +162,13 @@ static int fintek_8250_base_port(u16 io_address, u8 *key,
u8 *index)
continue;
fintek_8250_exit_key(addr[i]);
- *key = keys[j];
- *index = k;
- return addr[i];
+ pdata->key = keys[j];
+ pdata->base_port = addr[i];
+ pdata->index = k;
+
+ return 0;
}
+
fintek_8250_exit_key(addr[i]);
}
}
@@ -179,104 +176,21 @@ static int fintek_8250_base_port(u16 io_address, u8
*key, u8 *index)
return -ENODEV;
}
-static int
-fintek_8250_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
+int fintek_8250_probe(struct uart_8250_port *uart)
{
- struct uart_8250_port uart;
struct fintek_8250 *pdata;
- int base_port;
- u8 key;
- u8 index;
-
- if (!pnp_port_valid(dev, 0))
- return -ENODEV;
+ struct fintek_8250 probe_data;
- base_port = fintek_8250_base_port(pnp_port_start(dev, 0), &key, &index);
- if (base_port < 0)
+ if (find_base_port(&probe_data, uart->port.iobase))
return -ENODEV;
- memset(&uart, 0, sizeof(uart));
-
- pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
+ pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
- uart.port.private_data = pdata;
- if (!pnp_irq_valid(dev, 0))
- return -ENODEV;
- uart.port.irq = pnp_irq(dev, 0);
- uart.port.iobase = pnp_port_start(dev, 0);
- uart.port.iotype = UPIO_PORT;
- uart.port.rs485_config = fintek_8250_rs485_config;
-
- uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
- if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE)
- uart.port.flags |= UPF_SHARE_IRQ;
- uart.port.uartclk = 1843200;
- uart.port.dev = &dev->dev;
-
- pdata->key = key;
- pdata->base_port = base_port;
- pdata->index = index;
- pdata->line = serial8250_register_8250_port(&uart);
- if (pdata->line < 0)
- return -ENODEV;
+ memcpy(pdata, &probe_data, sizeof(probe_data));
+ uart->port.rs485_config = fintek_8250_rs485_config;
+ uart->port.private_data = pdata;
- pnp_set_drvdata(dev, pdata);
return 0;
}
-
-static void fintek_8250_remove(struct pnp_dev *dev)
-{
- struct fintek_8250 *pdata = pnp_get_drvdata(dev);
-
- if (pdata)
- serial8250_unregister_port(pdata->line);
-}
-
-#ifdef CONFIG_PM
-static int fintek_8250_suspend(struct pnp_dev *dev, pm_message_t state)
-{
- struct fintek_8250 *pdata = pnp_get_drvdata(dev);
-
- if (!pdata)
- return -ENODEV;
- serial8250_suspend_port(pdata->line);
- return 0;
-}
-
-static int fintek_8250_resume(struct pnp_dev *dev)
-{
- struct fintek_8250 *pdata = pnp_get_drvdata(dev);
-
- if (!pdata)
- return -ENODEV;
- serial8250_resume_port(pdata->line);
- return 0;
-}
-#else
-#define fintek_8250_suspend NULL
-#define fintek_8250_resume NULL
-#endif /* CONFIG_PM */
-
-static const struct pnp_device_id fintek_dev_table[] = {
- /* Qtechnology Panel PC / IO1000 */
- { 'PNP0501'},
- {}
-};
-
-MODULE_DEVICE_TABLE(pnp, fintek_dev_table);
-
-static struct pnp_driver fintek_8250_driver = {
- .name = DRIVER_NAME,
- .probe = fintek_8250_probe,
- .remove = fintek_8250_remove,
- .suspend = fintek_8250_suspend,
- .resume = fintek_8250_resume,
- .id_table = fintek_dev_table,
-};
-
-module_pnp_driver(fintek_8250_driver);
-MODULE_DESCRIPTION('Fintek F812164 module');
-MODULE_AUTHOR('Ricardo Ribalda <ricardo.ribalda@xxxxxxxxx>');
-MODULE_LICENSE('GPL');
diff --git a/drivers/tty/serial/8250/8250_port.c
b/drivers/tty/serial/8250/8250_port.c
index 489c16a..b2ded94 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1297,6 +1297,13 @@ static void autoconfig(struct uart_8250_port *up)
out_lock:
spin_unlock_irqrestore(&port->lock, flags);
+
+ /*
+ * Check if the device is a Fintek F81216A
+ */
+ if (port->type PORT_16550A)
+ fintek_8250_probe(up);
+
if (up->capabilities != old_capabilities) {
printk(KERN_WARNING
'ttyS%d: detected caps %08x should be %08xn',
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index b0a9b57..6e00d718 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -57,6 +57,18 @@ config SERIAL_8250_PNP
This builds standard PNP serial support. You may be able to
disable this feature if you only need legacy serial support.
+config SERIAL_8250_FINTEK
+ bool 'Support for Fintek F81216A LPC to 4 UART RS485 API'
+ depends on SERIAL_8250
+ ---help---
+ Selecting this option will add support for the RS485 capabilities
+ of the Fintek F81216A LPC to 4 UART.
+
+ If this option is not selected the device will be configured as a
+ standard 16550A serial port.
+
+ If unsure, say N.
+
config SERIAL_8250_CONSOLE
bool 'Console on 8250/16550 and compatible serial port'
depends on SERIAL_8250=y
@@ -353,14 +365,6 @@ config SERIAL_8250_OMAP_TTYO_FIXUP
not booting kernel because the serial console remains silent in case
they forgot to update the command line.
-config SERIAL_8250_FINTEK
- tristate 'Support for Fintek F81216A LPC to 4 UART'
- depends on SERIAL_8250 && PNP
- help
- Selecting this option will add support for the Fintek F81216A
- LPC to 4 UART. This device has some RS485 functionality not available
- through the PNP driver. If unsure, say N.
-
config SERIAL_8250_LPC18XX
tristate 'NXP LPC18xx/43xx serial port support'
depends on SERIAL_8250 && OF && (ARCH_LPC18XX || COMPILE_TEST)
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 6327d0a..cfe9dc8 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o
8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
8250_base-y := 8250_port.o
8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
+8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
@@ -23,7 +24,6 @@ obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
-obj-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o
obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o
--
2.6.6
--
To unsubscribe, e-mail: opensuse-kernel+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse-kernel+owner@xxxxxxxxxxxx

Drivers for Notebooks ⇒ MSI Laptops & Desktops ⇒ Page #1 ⇒ MSI MS-7309

MSI MS-7309 Drivers Installer

2.02

1.1 Mb

NVIDIA nForce System Management Controller

MSI MS-7309

Creative Game Port

MSI MS-7309

NVIDIA GeForce 9800 GT

MSI MS-7309

NVIDIA Network Bus Enumerator

MSI MS-7309

NVIDIA nForce System Management

MSI MS-7309

Envy24 Family Audio Controller WDM

MSI MS-7309

PCIVEN_00CC&DEV_00CC

MSI MS-7309

NVIDIA GeForce 6100 nForce 405

MSI MS-7309

ATI DTV Wonder Digital Tuner Device

MSI MS-7309

AVerMedia M787 PCI-e Hybrid DVB-T

MSI MS-7309

PCI SoftV92 Speakerphone Modem

MSI MS-7309

USBVID_043D&PID_007D

MSI MS-7309

USBVID_0D8C&PID_5000

MSI MS-7309

USBVID_04B8&PID_011D

MSI MS-7309

USBVID_1B80&PID_D416

MSI MS-7309

USBVID_0924&PID_42B1

MSI MS-7309

Broadcom 2045 Bluetooth 2.0 USB-UHE Device

MSI MS-7309

Realtek High Definition Audio

MSI MS-7309

*TEREDO

MSI MS-7309

*ISATAP

MSI MS-7309

Alps Pointing-device

MSI MS-7309

Dell Touchpad

MSI MS-7309

ACPIPNP0303

MSI MS-7309